Germs, viruses, bugs, need a way into your system to make you sick. The fastest way is through the mucous membranes. So, if you are in the habit of rubbing your eyes, pulling on your lips, picking your nose, cut it out. You’ll stay healthier and look better too! 🙂
To make your own hummingbird feeder:
You will need:
a 500 ml bottle indented a few centimetres from the bottom
a 100 gram plastic container with a tight fitting lid
string for hanging
red “flowers” of some sort (or ribbons or ? as an attractant)
a way to make holes in plastic, either a drill or knife or ?
a cup of coffee (or tea if you prefer)
The nectar is super easy to make but needs to be done ahead of time so it is cool:
boil 500 mls of water
add 125 mls of sugar
stir till sugar is absorbed
put in fridge to cool
Always use real sugar, the birds need the calories to survive. Don’t ever use artificial sweeteners.
Tip: Every few days, (or more often if you see signs of mould or other growth) take your feeder apart to thoroughly clean it in hot water then reassemble with fresh nectar.
(instructions adapted from this Wonder How to Do It post)
Today I made a hummingbird feeder.
I’ve been thinking about it for a couple of days now, so yesterday I shelled out a few pesos to google “homemade hummingbird feeders”. I got lots of websites, but they all required purchasing some special components then essentially assembling the feeder. When you live in a place that has ready access to such supplies, and when you have a bit of extra cash, it doesn’t even occur to you there are other options. But I am still recovering from the flu, so instead of continuing to ride north on the 1000 mile mule ride I am on, (La Mula Mil) I am staying at Trudi’s, my friend’s house in small town San Ignacio in Baja California Sur on the Baja Peninsula in Mexico and I am watching my pesos and my energy. And even if I wasn’t, there wouldn’t be anywhere for me to buy a “hummingbird feed tube attachment as illustrated.”.
So, I kept looking. I knew there had to be away to make one from stuff I could find laying around. Once upon a time I could have figured the whole thing out myself, but in the busyness of life, I seemed to have shut off the creative side of my brain sometime in the last few years.
Sure enough I finally found a website. It had a hand-sketched plan for making a hummingbird feeder from found items. It did call for the use of a power drill, which I definitely didn’t have access to, but that’s ok, it was only for going through plastic, I knew I could hack that myself.
So, I rooted through a pile of bottles in the yard until I found a couple that had an indented ring near the bottom, (which will be the top really) so that it would be easier to securely hang it with string. I then found some string in a basket near the plates in the kitchen. (Isn’t that where everyone keeps their string?) I had previously stumbled across Trudi’s stash of plastic ware in the unused oven that serves as a support for the two burner propane stovetop (remember, this is small town Mexico-everything gets re-purposed here!) so I had a small clear plastic container with a tight fitting lid.
I was a bit stuck on the red required to attract hummingbirds. I didn’t have any food colouring, which shouldn’t ever be put in the nectar anyways, it’s bad for the birds. I didn’t have a red felt marker to draw designs, which is just as well as I do girly-girl drawings like flowers and hearts about as well as Charlie Brown flies a kite and is likely the real reason I didn’t become a teacher. Well, that and I didn’t go to university.
Then I remembered that I had a red plastic bag from goodness knows what purchase in what airport, but I figured I could cut it into strips with the little tiny thread scissors I have in my sewing kit.
Now all that was left to do was to come up with a drill substitute. No worries, I was working with plastic, so instead of using a keyhole spade to cut a hole in the container lid wide enough to accept the mouth of the drink bottle, I drew a circle the exact size of said mouth and used my knife to cut an X inside of it so I could work the mouth through then trim off the excess plastic. As you can see from the picture, I didn’t get it in the exact centre, so those of you who know me are already laughing at how barmy it is driving me that it is not perfectly balanced.
Now that I had the hardest part done I moved into the kitchen and heated up the awl on my pocket knife. Well, it’s not really an awl, but it is a Phillips screwdriver head, so close enough for this project. I stuck it in the flame of the propane stove then pushed it through from the top of the lid to the bottom. I wiggled it as it went to make the hole a little bigger. The awl gets really hot, you should avoid touching it with your thumb knuckle. As per usual, I learnt that the hard way, but luckily I was right next to the sink so I could stick my thumb under the cold water.
I made four holes in the container lid for the hummingbirds to sip through, that’s why I wanted the pointy bits pointing into the container so they couldn’t get caught up in them. Then I flipped the whole contraption upside down, so that I could make a hole in the drink lid for the nectar to get through to the clear container. You have to heat the awl even hotter to get through the heavy plastic of the drink lid. Make sure you are still near the sink so that when you accidentally put your finger on the awl you can quickly put it under the cold water to cool it down. Just saying… then again, you are likely not as clumsy as me and either didn’t repeat the earlier mistake or burn yourself the first time even.
Once all the melting of plastic (and burning of flesh) was done, I poured in half the nectar I made yesterday, screwed the drink lid on tight and poured the other half of the nectar in the clear container. Next was the trickiest part, flipping the bottle over so that the nectar would drip into the clear container and pressing the lid of the container on firmly so that when it is hung up it all stays together. I almost did it the other way, yep, almost picked up the container of nectar and turned it over to push it onto the feeder. Luckily I caught myself in time and avoided a “d’oh” moment and a big sugary, ant-attracting mess. I had considered putting all the nectar into the bottle then squeezing it into the container part when it was all assembled but thought that I had a pretty good chance of squeezing too hard and somehow blowing the lid off and making (say it with me!) a big, sugary, ant-attracting mess.
So, then all that was needed was to tie the hanging string around the bottle, add some red ribbons and voila! Hummingbird feeder!
I found a nail already in a beam in the palapa outside the kitchen and managed to hang it up without falling off the chair. Around the area I also added some “flowers” I made from the red bag to further increase my chances of attracting some beautiful flying jewels.
Then I sat back and enjoyed the rest of my coffee. As I sat there, I ruminated on how much I have always enjoyed making crafty kinda things, and how little of it I have done in the last decade or so. Somehow the fun stuff in life slipped away, replaced by work stuff. Today I rediscovered that joy. Is my feeder “pretty”? No, not really, but I made it myself, it cost me an hour of time and a half cup of sugar. And it will give me hours and hours of pleasure while helping out my feathered friends.